STAINLESS STEEL SLOT DRAIN CLEAN OUT SYSTEM
Slot drain clean out system is designed to provide you with possibility to clean your slot drain system from debris and avoid clogging. It consists of two parts, plastic base (installed underground) and Stainless Steel slot system itself. Slot can be filled with the same filler that is used for the project (concrete, gravel, different type of paving, such as asphalt or stone). Since insert and base are separate parts, the insert can be easily taken out off the base and provide an access for removing debris and cleaning. The system works with any basic channels.
PARAMETERS
Article ................................ 4COUTSSG
Material ............................. PPE Plastic / Stainless Steel
Dimensions ....................... 19.4"L x 6"W
Depth ................................. 16"
Load Class ....................... C
INCLUDED IN PACKAGE
1 - Plastic Sand Trap
1 - Stainless Steel Slot Drain Trap Base and Cap
1 - Debris Basket
Our catch basin and sand trap installations are very similar to trench drain installation, however there are a couple of steps to make sure its ran smoothly. So, lets go step by step.
1. Make sure you know where your outlet height and location is going to be. Something that we need to make sure of is that the distance between the basin outlet and where the piping is, is level. This is by trial and error as stated in step 3.
2. Dig your basin hole 2-3 inches wider than the basin, and 3-4 inches deeper. This allows for your "filler" to get poured after placement. By filler we mean concrete, sand, clay, or any material that you are using.
3. Place your 2-3 inches of your filler at the bottom of your catch basin hole. Then at this point is where you will make sure that your pipe connection is level. Once you have the desired height on the surface, and your outlet is lined up, then you connect your outlet piping immediately.
4. Fill around your basin with cement , concrete, or whichever filler you desire. make sure its in all crevices and no air is in. This makes for a long lasting basin. If concrete, please allow to settle for 48 hours before driving over.
And that's all. If you have any questions, please feel free to contact us at anytime. Thank you for choosing Standartpark!
Slot drain clean out system is designed to provide you with possibility to clean your slot drain system from debris and avoid clogging. It consists of two parts, plastic base (installed underground) and Stainless Steel slot system itself. Slot can be filled with the same filler that is used for the project (concrete, gravel, different type of paving, such as asphalt or stone). Since insert and base are separate parts, the insert can be easily taken out off the base and provide an access for removing debris and cleaning. The system works with any basic channels.
PARAMETERS
Article ................................ 4COUTSSG
Material ............................. PPE Plastic / Stainless Steel
Dimensions ....................... 19.4"L x 6"W
Depth ................................. 16"
Load Class ....................... C
INCLUDED IN PACKAGE
1 - Plastic Sand Trap
1 - Stainless Steel Slot Drain Trap Base and Cap
1 - Debris Basket
Our catch basin and sand trap installations are very similar to trench drain installation, however there are a couple of steps to make sure its ran smoothly. So, lets go step by step.
1. Make sure you know where your outlet height and location is going to be. Something that we need to make sure of is that the distance between the basin outlet and where the piping is, is level. This is by trial and error as stated in step 3.
2. Dig your basin hole 2-3 inches wider than the basin, and 3-4 inches deeper. This allows for your "filler" to get poured after placement. By filler we mean concrete, sand, clay, or any material that you are using.
3. Place your 2-3 inches of your filler at the bottom of your catch basin hole. Then at this point is where you will make sure that your pipe connection is level. Once you have the desired height on the surface, and your outlet is lined up, then you connect your outlet piping immediately.
4. Fill around your basin with cement , concrete, or whichever filler you desire. make sure its in all crevices and no air is in. This makes for a long lasting basin. If concrete, please allow to settle for 48 hours before driving over.
And that's all. If you have any questions, please feel free to contact us at anytime. Thank you for choosing Standartpark!
Standartpark Company
We have been in business for over 19 years, working hard within the European market, and setting standards which are now used world wide. We bring this hard work now to Canada. As one of the top leading manufacturers of surface drainage systems and solutions in the European market, we now open our project and customer division herein Canada. We are a proud company, who promotes higher standards for residential and industrial solutions and standby our products. We are happy to finally be here, and looking forward to the future.
«STANDARTPARK» TODAY:
- 19 years on the market
- 6 production plants
- More than 35 sales offices in different cities and countries
- International team of employees of more than 550 people
- Design bureau (development of new own products)
- Design service (design and calculation of engineering networks)
- More than 15 product lines, 10 under own trademarks
- The production of the company is certified according to the quality management standard ISO 9001 and the quality of the goods is confirmed by the Declaration of Performance.
Our Mission Statement
To change the efficiency of your homes, recreational areas,streets and cities - to preserve and protect the natural beauty which is found at your front door steps, to the very jobs you work at or build.
Water will always choose the shortest and easiest way out, but we will create these ways that are more efficient and satisfy you, our customer, while being a great and easy installation at the same time.
We strive to provide a safe neighborhood for people and water to coexist with each other - and to save our roadways from the destructive power of mother nature.
How we started?
Standartpark’s history dates back in 2000, when during our travels we were faced with a repeating issue - How to reach a solution that is better than others- How to effectively remove dirt, debris, and water without any future issues. We reject and remove the excuses about a system that won't work, a system that doesn’t solve your problem. We focus on the facts, and know that we at Standartpark can make a large difference to live in a clean and efficient environment.
Where can our products be used?
- Residential Buildings
- Warehouses, Sea Ports
- Airports
- Railway Stations
- Parking Lots
- Stadiums
- Swimming Pools
- Landscaping Architecture
- Roofs
- Gas Stations and Service Stations
- Car Washes
- Parks
How do we operate?
We design, manufacture and sell our own drainage solutions. We take out the middle man to make sure you have the best price and customer service possible. Something that, in our opinion, is running out of style. We conduct and host seminars, training sessions, and design solutions with
the top leaders of the building industry along with sellers of network sales nations wide. Our staff is highly trained to make complex calculations for your project. We use materials such as galvanized stamped steel, ductile cast iron, and PPE Plastic along with much more, depending on your installation and specifications. These materials can be used in any design solution, taking into account the aggressive nature of our environment, and allow us to solve these issues.
Standartpark is its own design office and effective management system. We are an acclimated and very reliable brand that is well known and trusted in Europe, and will be very soon in Canada. We have a keen eye in the internet market and customer market, we promote our products with pride and a smile. And are happy to finally serve you.
Thank you for choosing Standartpark.
