10x10 Catch Basin Cast Iron Grate



Standartpark 10 x10 inch catch basin has unique design. It comes with ductile cast iron grating and debris basket. The basket collects debris, preventing them from getting into the system. The grate simply snaps into the basin. A Load Class - Pedestrian Traffic. Drawing with actual dimensions can be downloaded from "specification sheet" below.
PARAMETERS
Article - 0867031
Material - PPE Plastic/Cast Iron
Dimensions - 10" L x 10" W x 10" H
Load Class - A - 3,300 LBS (Pedestrian Load)
INCLUDED IN PACKAGE
1 - 10"x10" Catch Basin
1 - Ductile Cast Iron Grate
1 - Debris Basket
Our catch basin and sand trap installations are very similar to trench drain installation, however there are a couple of steps to make sure its ran smoothly. So, lets go step by step.
1. Make sure you know where your outlet height and location is going to be. Something that we need to make sure of is that the distance between the basin outlet and where the piping is, is level. This is by trial and error as stated in step 3.
2. Dig your basin hole 2-3 inches wider than the basin, and 3-4 inches deeper. This allows for your "filler" to get poured after placement. By filler we mean concrete, sand, clay, or any material that you are using.
3. Place your 2-3 inches of your filler at the bottom of your catch basin hole. Then at this point is where you will make sure that your pipe connection is level. Once you have the desired height on the surface, and your outlet is lined up, then you connect your outlet piping immediately.
4. Fill around your basin with cement , concrete, or whichever filler you desire. make sure its in all crevices and no air is in. This makes for a long lasting basin. If concrete, please allow to settle for 48 hours before driving over.
And that's all. If you have any questions, please feel free to contact us at anytime. Thank you for choosing Standartpark!

Customer Reviews
Standartpark 10 x10 inch catch basin has unique design. It comes with ductile cast iron grating and debris basket. The basket collects debris, preventing them from getting into the system. The grate simply snaps into the basin. A Load Class - Pedestrian Traffic. Drawing with actual dimensions can be downloaded from "specification sheet" below.
PARAMETERS
Article - 0867031
Material - PPE Plastic/Cast Iron
Dimensions - 10" L x 10" W x 10" H
Load Class - A - 3,300 LBS (Pedestrian Load)
INCLUDED IN PACKAGE
1 - 10"x10" Catch Basin
1 - Ductile Cast Iron Grate
1 - Debris Basket
Our catch basin and sand trap installations are very similar to trench drain installation, however there are a couple of steps to make sure its ran smoothly. So, lets go step by step.
1. Make sure you know where your outlet height and location is going to be. Something that we need to make sure of is that the distance between the basin outlet and where the piping is, is level. This is by trial and error as stated in step 3.
2. Dig your basin hole 2-3 inches wider than the basin, and 3-4 inches deeper. This allows for your "filler" to get poured after placement. By filler we mean concrete, sand, clay, or any material that you are using.
3. Place your 2-3 inches of your filler at the bottom of your catch basin hole. Then at this point is where you will make sure that your pipe connection is level. Once you have the desired height on the surface, and your outlet is lined up, then you connect your outlet piping immediately.
4. Fill around your basin with cement , concrete, or whichever filler you desire. make sure its in all crevices and no air is in. This makes for a long lasting basin. If concrete, please allow to settle for 48 hours before driving over.
And that's all. If you have any questions, please feel free to contact us at anytime. Thank you for choosing Standartpark!
