Placeholder 6” Wide Trench Drains | Vodaland Canada – Tagged "Load Class_C - 55000 LBS"
FREE SHIPPING ACROSS CANADA ON ORDERS OVER $299
  • Contact Us Quote me
    • FREE SHIPPING OVER $299

    6 inch trench drain

    The 6” system can move an essential amount of water and save you money. You can connect channels end-to-end to create a line (linear drainage system). There’s no need for an adapter if your project requires a 90-degree turn because channels have built-in 90-degree connections on each side. Multiple grating options are available. Offered load classes: A, B and C

    What is the length of each trench drain?

    All Vodaland trench drains are 1-meter (3.28ft) lengths. Trench drains can be connected together for longer runs, and units can be cut to match specific sizing requirements.

    Is the 6” width an internal or external dimension?

    The 6” category and all other width categories represent the internal width of channel, and the same applies to the depth sizes shown for each channel. External dimensions vary for each type of channel, and customers can view external dimensions through the spec drawings provided on each product page.

    How do I connect the trench drains together?

    We design all of our trench drain channels to be connectable with each other via male-to-female connections. Depending on model, your trench drain may either “click” together, or simply fit together for connection. It is very important that all connections are silicone sealed.

    How do I connect piping?

    For piping, Vodaland designs our channels with outlets options on the bottom, sides, and ends. These outlets can be attached to 4” Schedule 40 PVC with an adapter we sell separately. If other piping is to be used, we recommend connecting them to the outlets via rubber couplings which are sold externally.

    Do these need to be encased in concrete?

    Vodaland recommends that all our trench drains be encased in concrete for best reliability. Certain scenarios may not allow for the use of concrete, and in those cases customers may change the recommended installation method at their own discretion.

    What is the max/min temperatures that the plastic channel can handle?

    Our plastic trench drains are suitable for temperatures between -40 to +45 degrees Celsius. Our installation method accounts for seasonal temperature changes through the use of expansion joints.

    Do your trench drain channels have slope?

    Our trench drain channels are neutral, meaning no slope. For most small-to-medium scale projects, slope isn’t fully necessary. For those who require a slope, you can create a cascade system of multiple channel depths to create an artificial slope for your run.

    ["

    Available load classes for our 6" Base plastic trench drain:

    Load Class A - pedestrian foot traffic

    Load Class B - Residential vehicle traffic (no parking) and yard equipment

    Load Class C - Commercial vehicle traffic, residential vehicle parking, buses, and medium duty commercial equipment. 

    For more info on load classes click on the link:
    https://vodaland.ca/pages/load-classes

     

    "]

    Benefits of 6 inch systems...

    If a 4” system is not enough and an 8” system is too big for your project, then our 6” trench drain system may be a good alternative for you. This option features the same benefits you’ll find in our 4” and 8” trench drains. The 6” system can move an essential amount of water and save you money. You can connect channels end-to-end to create a line (linear drainage system). There’s no need for an adapter if your project requires a 90-degree turn because channels have built-in 90-degree connections on each side. Based on the type of grate—galvanized steel, plastic, or cast iron—we offer 3 different load classes: A, B, and C (from pedestrian loads to heavy-duty loads). Our plastic grate is B-load-class rated (vehicle loads), and it’s a great option for residential driveway/parking.

    Outlet connection options...

    Our 6” trench drain systems provide you with 4” and 6” outlet connections on the bottom, as well as 4” cut-out outlet connections on end caps. This gives you more freedom for connecting your PVC.

    We offer 3 different materials for grating with our 6" Basic PolyMax channels:

    Grate materialLoads ClassRust resistance
    Plastic
    A (Pedestrian)
    B (Light Vehicle)
    No rust
    Galvanized Steel
    A (Pedestrian)
    Zinc coating protection
    Cast Iron
    C (Heavy Vehicle)May rust over a long time

    Call for more information or to place an order!

    Our customer service squad and sales team are always here to help.

    (905) 238-1771