4" GEO GROUND GRID
PRODUCT DESCRIPTION
Standartpark - 4" ground grid covers most of applications. It widely use for erosion control. Perfect solution for any types of parking lots, spaces and may carry heavy loads. We make our ground grid from polyethylene which makes it last long time. It can be filled with different types of aggregates, soil, sand, crashed gravel and etc. The sections are easily stretched over you surface and anchored down, then filled with aggregate. One section can cover 160 sq ft. Sections can be easily cut and connected to each other side by side. Installation is smooth and easy.
We DO NOT recommend to use a pea gravel as pea gravel will not pack to create a stable surface as a filler.
We recommend to use for: parking lots, spaces, retaining walls, erosion control and different applications required for bearing medium to heavy loads.
PARAMETERS
Article ............... 8710
Height .............. 4"
Material ............ Modified Polyethylene
Coverage ......... 160 SQ FT
Dimensions ...... 9FT x 17FT
Thank you for your interest in Standartpark's cutting edge Geo Ground Grid. Our grid is one of a kind for many reasons. Its a dense and flexible polyethylene material rather than a textile fabric, and will hold up to just about whatever you want to drive on or do with. So first let us answer a couple of FAQ's.
1. You can cut it to size, just always make sure you are just filling the cells with the material, not the open cells.
2. This is perfect for driveway, parking lots, and gardens. Even heavy duty vehicles are good with this fabric.
3. You can use any type of material you want: soil, gravel, crached stones and more. Thanks to the polyethylene material.
4. You can connect theses grids together during installation, again, just make sure the cells add up together.
HOW TO INSTALL
1. Fully stretch out the geo grid in installation area before anchoring, making sure the size is what you wish it to be.
2. If there is any excess area please trim BUT make sure you keep the geo grid cells fully intact if you are filling them. To trim, use some good solid scissors, or hedge sheers. The geo grid is very easy to cut/trim.
3. Start by anchoring down one of the full-length sides. Anchor each cell down strong. You will be using this area to pull and stretch the rest of the grid.
4. Anchor down next side (NOT the opposing side of the grid). Working your way around and fully stretching and anchoring down the entire border of the grid.
5. Once the grid is fully stretching and anchoring down (the entire perimeter), make sure all is tight and firm. This is the key point in the installation process as you don't want loose sections holding your gravel.
You can dump and pour your fill directly on the grid. Spreading out as you go along. If you have a long driveway installation, you can dump the first load with bobcat - then immediately drive on it, to continue dumping your fill and spreading it out.
Overfill: if you wish to overfill your geogrid this is always completely fine. However, we recommend only one to two inches of overfill. Do keep in mind that whatever gravel is over the grid, is considered loose gravel and does not fall into erosion protection of the geogrid cells.
Pack and finish - usually just driving on the field grid will pack it down enough overtime. However, feel free to hand tamp or roll over if.
Customer Reviews
PRODUCT DESCRIPTION
Standartpark - 4" ground grid covers most of applications. It widely use for erosion control. Perfect solution for any types of parking lots, spaces and may carry heavy loads. We make our ground grid from polyethylene which makes it last long time. It can be filled with different types of aggregates, soil, sand, crashed gravel and etc. The sections are easily stretched over you surface and anchored down, then filled with aggregate. One section can cover 160 sq ft. Sections can be easily cut and connected to each other side by side. Installation is smooth and easy.
We DO NOT recommend to use a pea gravel as pea gravel will not pack to create a stable surface as a filler.
We recommend to use for: parking lots, spaces, retaining walls, erosion control and different applications required for bearing medium to heavy loads.
PARAMETERS
Article ............... 8710
Height .............. 4"
Material ............ Modified Polyethylene
Coverage ......... 160 SQ FT
Dimensions ...... 9FT x 17FT
Thank you for your interest in Standartpark's cutting edge Geo Ground Grid. Our grid is one of a kind for many reasons. Its a dense and flexible polyethylene material rather than a textile fabric, and will hold up to just about whatever you want to drive on or do with. So first let us answer a couple of FAQ's.
1. You can cut it to size, just always make sure you are just filling the cells with the material, not the open cells.
2. This is perfect for driveway, parking lots, and gardens. Even heavy duty vehicles are good with this fabric.
3. You can use any type of material you want: soil, gravel, crached stones and more. Thanks to the polyethylene material.
4. You can connect theses grids together during installation, again, just make sure the cells add up together.
HOW TO INSTALL
1. Fully stretch out the geo grid in installation area before anchoring, making sure the size is what you wish it to be.
2. If there is any excess area please trim BUT make sure you keep the geo grid cells fully intact if you are filling them. To trim, use some good solid scissors, or hedge sheers. The geo grid is very easy to cut/trim.
3. Start by anchoring down one of the full-length sides. Anchor each cell down strong. You will be using this area to pull and stretch the rest of the grid.
4. Anchor down next side (NOT the opposing side of the grid). Working your way around and fully stretching and anchoring down the entire border of the grid.
5. Once the grid is fully stretching and anchoring down (the entire perimeter), make sure all is tight and firm. This is the key point in the installation process as you don't want loose sections holding your gravel.
You can dump and pour your fill directly on the grid. Spreading out as you go along. If you have a long driveway installation, you can dump the first load with bobcat - then immediately drive on it, to continue dumping your fill and spreading it out.
Overfill: if you wish to overfill your geogrid this is always completely fine. However, we recommend only one to two inches of overfill. Do keep in mind that whatever gravel is over the grid, is considered loose gravel and does not fall into erosion protection of the geogrid cells.
Pack and finish - usually just driving on the field grid will pack it down enough overtime. However, feel free to hand tamp or roll over if.
